Author Topic: Woodworking  (Read 2510 times)

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Woodworking
« on: January 09, 2023, 04:02:03 PM »
I think I had a woodworking thread before the, you know what. I will do a quick restart. I had a project to replace an exterior door in a 100 year old church building. The original was long gone, the replacement was an interior hollow core with some box store 1x's nailed to the outside. Needless to say it was not constructed well and was rotting. The original jamb was in bad shape from years of guys messing with it, so it needed replaced as well. That ended up being the hardest part of the job.
2023-01-04_08-41-57 by Kerry Grubb, on Flickr
Existing door, didnt look too bad but it was really a POS.
2023-01-04_08-42-22 by Kerry Grubb, on Flickr
Take a lot of measurements, pictures and a few drawings.
2023-01-04_08-42-46 by Kerry Grubb, on Flickr
Existing jamb has seen better days.
2023-01-04_08-43-28 by Kerry Grubb, on Flickr
2023-01-04_08-43-12 by Kerry Grubb, on Flickr
Some layout and a full size template.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

d_hache

  • Active Forum Member
  • *
  • Posts: 157
Re: Woodworking
« Reply #1 on: January 09, 2023, 06:06:52 PM »
Good Job! really looks great.
I love wood working as well, i am not expert but i love to work with my hands on anything not just car.
Actually built another garage myself in the fall to continue the trans am restoration.
Now i have all the room i need for all the parts.
Hoping to get back working on the trans am in the srping.

Jack

  • Oracle Forum Member
  • *
  • Posts: 12429
  • 1971 Esprit TA Clone W72 1972 Formula 68 350 HO
Re: Woodworking
« Reply #2 on: January 09, 2023, 06:14:41 PM »
Great job Norm  :P :D




Regards, Jack

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13358
  • located in western Ky
Re: Woodworking
« Reply #3 on: January 09, 2023, 07:03:32 PM »
So nice!  I wish I could master finish carpentry/woodworking but it's just not in me.
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #4 on: January 09, 2023, 07:13:16 PM »
2023-01-04_08-44-16 by Kerry Grubb, on Flickr
planks cut and fitting started
2023-01-04_08-44-27 by Kerry Grubb, on Flickr
door taking shape
2023-01-04_08-45-17 by Kerry Grubb, on Flickr2023-01-04_08-46-10 by Kerry Grubb, on Flickr
exploded view of the joinery. A bit tricky as the face is flush but the inside is style and rail. This is to look like how the original was made. There was a set of double doors that has survived the century to look at, but I had no idea on how the joinery worked. I had to make that part up.2023-01-04_08-46-23 by Kerry Grubb, on Flickr
The non show side of the rails have a sliding dovetail across the width of the door. I hope this will prevent splitting. The outside of the planks need to move and the inside rails need to stay put.
2023-01-04_08-45-46 by Kerry Grubb, on Flick
Glued up and ready to go
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Re: Woodworking
« Reply #4 on: January 09, 2023, 07:13:16 PM »

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #5 on: January 09, 2023, 07:20:16 PM »
2023-01-04_08-51-16 by Kerry Grubb, on Flickr
A coat of primer, before the colour, door is ready for the jamb.
2023-01-04_08-47-21 by Kerry Grubb, on Flickr
2023-01-04_08-47-31 by Kerry Grubb, on Flickr
2023-01-04_08-47-48 by Kerry Grubb, on Flickr
2023-01-04_08-48-12 by Kerry Grubb, on Flickr
2023-01-04_08-48-26 by Kerry Grubb, on Flickr
2023-01-04_08-50-03 by Kerry Grubb, on Flickr
Curved sections at the top of the jamb were done 3 ways, stack sawn, carved from solid and laminated glue up. Each of these pieces were put together to make the top.2023-01-04_08-48-39 by Kerry Grubb, on Flickr
2023-01-04_08-51-01 by Kerry Grubb, on Flickr
Side trim was made from multiple pieces as well2023-01-04_08-50-51 by Kerry Grubb, on Flickr

Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #6 on: January 09, 2023, 07:27:57 PM »
2023-01-04_08-51-31 by Kerry Grubb, on Flickr
Jamb primed and ready for paint2023-01-04_08-52-06 by Kerry Grubb, on Flickr
Ext shot finished!

2023-01-04_08-52-20 by Kerry Grubb, on Flickr
Fitting the trim to the stone was another challenge.2023-01-04_08-51-54 by Kerry Grubb, on Flickr
Inside view.

We did not work steady on the door, usually weekends and evenings and rainy days. It took several months to go from rough lumber to a finished product. The installation was a one day job. That included tearing the old door and jamb out, installing the new jamb, door and hardware. We needed to do the installation in one day because the job was almost 3 hrs one way from the shop. I didnt want to have to make too many trips! Everything was done by myself and my son. All the material is African Mahogany for weather resistance.

I am now working on a set of cabinets for the same church. If I get a chance I will photo document that one as well.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

5th T/A

  • Oracle Forum Member
  • *
  • Posts: 1372
Re: Woodworking
« Reply #7 on: January 10, 2023, 05:05:34 AM »
Another beautiful job! I can only imagine the immense pride and satisfaction you and your son must have completing a project like this. Any idea of total hours involved?
1980 T/A with a Pontiac 461

Gone but not forgotten;
1973 T/A 455
1975 T/A 400
1978 T/A W72
1982 T/A cross fire injected

Two wheel toys;
2014 Harley Ultra Classic Limited
2013 Honda CB1100
2010 Yamaha Vmax
1982 Yamaha Seca 750

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #8 on: January 10, 2023, 07:12:51 AM »
Thanks Larry, I do have an exact count but I would have to go back through my books and add stuff up, I would guestimate about 80+ though.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13358
  • located in western Ky
Re: Woodworking
« Reply #9 on: January 10, 2023, 07:30:20 AM »
I can't even imagine something like that.  My woodworking consists of my Stihl MS291 and dead trees.
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

FormTA

  • Oracle Forum Member
  • *
  • Posts: 5538
  • Life is short, have fun, Drive a T/A
Re: Woodworking
« Reply #10 on: January 10, 2023, 09:06:53 AM »
Wow! That is really amazing! Crazy talent there. I hope you got paid well for that. That is a project slim to none would take on as a contractor. Great job Kerry!
79 Trans am low buck LS swapped
79 Formula 301 (Work in progress)
67 RS Camaro (waiting it's turn)
69 Dodge charger on late model charger chassis
49 Ford F1 on a 2003 Chevy ZR2 Chassis (current project)
Names, Luke. If I hear anyone telling me they're my father....

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #11 on: January 10, 2023, 10:25:27 AM »
We have a niche for doing this kind of stuff. This church got my name from another church we did similar work to a couple of years ago. You are correct that not many people want to do jobs like this, and fewer with the skills (not trying to sound egotistical). I am 4th generation building crap and trying to pass on what I can to my son. Most of the guys that knew this kind of stuff are long gone. If one cant go to HD or Lowes and buy it then it cant be done!
I will say it was not an in expensive job.
I
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

ryeguy2006a

  • Oracle Forum Member
  • *
  • Posts: 6038
Re: Woodworking
« Reply #12 on: January 10, 2023, 11:13:04 AM »
Wow, that looks great Kerry! It's too bad that they wanted you to paint over that Mahogany, I'll bet that would have looked amazing with a nice stain and few coats of poly!

1976 Trans Am LS1 and much more...SOLD
1968 Camaro LSA, T56 Magnum, and much more...SOLD

Current Project: 1955 Nomad LC9, 4L80e, C5 brakes and etc...

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #13 on: January 10, 2023, 03:07:09 PM »
Heres a tool box I built for myself a few years ago. It is primarily for my hand tools. It was loosely based on one in the
 Colonial Williamsburg collection from the 18th century.                                                                 
2023-01-10_03-56-23 by Kerry Grubb, on Flickr
2023-01-10_03-56-33 by Kerry Grubb, on Flickr
2023-01-10_03-56-44 by Kerry Grubb, on Flickr2023-01-10_03-56-57 by Kerry Grubb, on Flickr
2023-01-10_03-57-05 by Kerry Grubb, on Flickr

Hidden compartment in the back of the small till box.
2023-01-10_03-57-24 by Kerry Grubb, on Flickr
2023-01-10_03-57-33 by Kerry Grubb, on Flickr
2023-01-10_03-57-40 by Kerry Grubb, on Flickr
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #14 on: January 10, 2023, 03:09:25 PM »
Large box is made from cypress. The inside stuff is white pine with mahogany veneer. I did all of the veneer work old school with hot hide glue. The inside of the lid is going to have a compass point veneered in place. I pulled this out of the back of the shop after a 5 year sleep. Its been awhile since I have built any furniture :sad: I have the urge so I may finish up with this over the winter.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Re: Woodworking
« Reply #14 on: January 10, 2023, 03:09:25 PM »

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #15 on: January 10, 2023, 03:15:03 PM »
Ryan, the door being made from mahogany is purely for longevity as an exterior door. Its a pretty good wood to use for outside stuff. That and Cypress, but cypress is a bit coarser grained and a bit oily. What I used for this is called African Mahogany I dont think its a 'true' mahogany and some of it is quite ugly, imho! There are some pieces that are a bit darker and denser, if I were building a piece of furniture I would pick those out for that purpose. True mahogany is almost impossible to get now, Cuban mahogany is all but gone. That is what all of the furniture masterpieces of the 18th cent. were made of. That really is a beautiful piece of wood!!
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

5th T/A

  • Oracle Forum Member
  • *
  • Posts: 1372
Re: Woodworking
« Reply #16 on: January 11, 2023, 11:10:21 AM »
Mike, I have seen some impressive wood carving done with chain saws, ice sculptures too.

Kerry, not that long ago trades were passed down generation to generation, today almost unheard of. You passing your skills down to your son is fantastic. The fact that he has an interest is great. I have a few family members into furniture making as a hobby. They find it very rewarding and relaxing. Sorry as I tend to ramble on, your hand tools reminded me of a show I used to watch on PBS. I think it was called the Woodwright. It was just amazing to see what this guy could do with hand tools.
1980 T/A with a Pontiac 461

Gone but not forgotten;
1973 T/A 455
1975 T/A 400
1978 T/A W72
1982 T/A cross fire injected

Two wheel toys;
2014 Harley Ultra Classic Limited
2013 Honda CB1100
2010 Yamaha Vmax
1982 Yamaha Seca 750

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #17 on: January 12, 2023, 08:59:55 AM »
Roy Underhill was the guy on the Woodright. I know him, he is a great guy, he comes off as somewhat scattered and some of the stuff he had on his show seemed maybe a bit crude, but he is a highly skilled craftsmen with a high level of intelligence.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

FormTA

  • Oracle Forum Member
  • *
  • Posts: 5538
  • Life is short, have fun, Drive a T/A
Re: Woodworking
« Reply #18 on: January 12, 2023, 01:56:26 PM »
That's cool you know him. I loved watching his show! I think I understood he was just trying to get as much information across to the viewers in the short amount of time he had. I act like that too when I have a limited amount of time with a person who is interested in something I have a passion for.

How did you meet him?
79 Trans am low buck LS swapped
79 Formula 301 (Work in progress)
67 RS Camaro (waiting it's turn)
69 Dodge charger on late model charger chassis
49 Ford F1 on a 2003 Chevy ZR2 Chassis (current project)
Names, Luke. If I hear anyone telling me they're my father....

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13358
  • located in western Ky
Re: Woodworking
« Reply #19 on: January 12, 2023, 04:32:58 PM »
Mike, I have seen some impressive wood carving done with chain saws, ice sculptures too. 

One year on my annual Colorado camping trip, I happened across this.  It wasn't there the season before, but there it was the following year. Is it a perfect piece of art? No, but still cool as all get-out and a whole lot better than I could do.  I now make it a point to go by it every year while hunting.  And this area is a walking or atv/utv access area only.  Your car or SUV would be destroyed long before you got to this, so obviously a local loaded up their chainsaw and rode back there to make our "totem-pole" magically appear.

An elk, just because...

   And:  Locally, in the town of Paducah (named after Chief Paduke) someone was back in the early 80's chiseled and chainsawed a tribute to the Chickasaw chief.  It remains on display in the city park.
« Last Edit: January 12, 2023, 04:39:07 PM by kentucky yeti »
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #20 on: January 16, 2023, 08:12:44 AM »
Those are really cool Mike.

Luke, I belong to a woodworking guild, there is an annual meeting in Williamsburg. Many years ago Roy Underhill was the guest speaker. He was staying in the same hotel as myself. After the meeting I went to the small lounge to partake on a glass of Kentucky's finest and a treasure from Cuba and Mr. Underhill was in there as well. There were only about 5 or 6 of us in there and we became chummie. Every year after we would get together at the meeting. I know him well enough to walk up and speak and have done so on a personal level many times, however I doubt he would know me from Adam.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Raven

  • Active Forum Member
  • *
  • Posts: 825
    • Yellowstone Computing
Re: Woodworking
« Reply #21 on: January 16, 2023, 08:25:51 PM »
Kerry, that's a really nice-looking project there! A friend of mine got me started in woodworking a few years ago; I'm still a junior wood-butcher (as opposed to seasoned wood-elf) but after a long day slaying IT dragons it sure is nice to work with something a bit more compliant! I've been working on various bookshelves and bookcases for our house. Made some swords for the nieces and nephews this Christmas, the shields are still in the production line though.
1978 Mayan Red Trans Am, '74 455SD, 4-speed.
1977 Trans Am SE, Y82, 400, auto. (Sold)
1999 Navy Blue Metallic Trans Am, LS1, auto. (Sold)
Time Flies in a Trans Am!
https://www.yellowstonecomputing.net

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #22 on: January 17, 2023, 07:16:33 AM »
That sounds like fun. I am a 3rd generation carpenter, and enjoy building furniture on my time off. Something wrong with this picture? One of the reasons I got into cars and restoration, I was too immersed in wood stuff, every time I built a new piece my wife would ask me why? So I decided to build cars instead. I still get the why question though!
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Raven

  • Active Forum Member
  • *
  • Posts: 825
    • Yellowstone Computing
Re: Woodworking
« Reply #23 on: January 17, 2023, 12:44:52 PM »
LOL, I can empathize with that! I really enjoy learning new skills, especially tradecraft. My dad was an ironworker for many decades and while I didn't follow in his profession, he taught me a great many skills, though carpentry wasn't among them. Taught me how to log timber though, like his father before him. As we would travel the country he'd point out different buildings or powerplant chimneys he'd worked on.

My son and daughter both like to be involved in my projects, whether it's wood projects, automotive, etc. I once asked my son what he wanted to be when he grew up (he was about 4 at the time); he gave me a quizical look and said "I be Fweddie" (Freddie), as if it were obvious.  :D Best answer I ever got to that question! My dad would often say "I still don't know what I want to be when I grow up!"
1978 Mayan Red Trans Am, '74 455SD, 4-speed.
1977 Trans Am SE, Y82, 400, auto. (Sold)
1999 Navy Blue Metallic Trans Am, LS1, auto. (Sold)
Time Flies in a Trans Am!
https://www.yellowstonecomputing.net

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #24 on: August 06, 2023, 08:47:44 AM »
Did some restoration work on a drop leaf table. It belongs to my wifes boss. I think its about a hundred years old, not much in terms of furniture. The table top itself was battered pretty badly, and the leaves had warped beyond. Luckily the mahogany veneer was very thick (compared to todays stuff that is about like a piece of paper). I started off by pulling the veneer off of the substraight using long wood wedges I made. Hammering them in very carefully. Had to do this on both sides. Once I had those off and put to the side for reuse, I cut the leaf in pieces, and reguled it back flat. One I had to build from new as it was too badly warped.
2023-08-04_06-35-39 by Kerry Grubb, on Flickr
2023-08-04_06-35-46 by Kerry Grubb, on Flickr2023-08-04_06-35-27 by Kerry Grubb, on Flickr
2023-08-04_06-34-19 by Kerry Grubb, on Flickr2023-08-04_06-35-07 by Kerry Grubb, on Flickr2023-08-04_06-34-41 by Kerry Grubb, on Flickr2023-08-04_06-34-51 by Kerry Grubb, on Flickr
The edge of the table had a triple bead. I had to make a scratch stock to replicate what was there.

Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Re: Woodworking
« Reply #24 on: August 06, 2023, 08:47:44 AM »

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #25 on: August 06, 2023, 08:53:15 AM »
2023-08-04_06-34-04 by Kerry Grubb, on Flickr
This is the lone drawer, one was missing so I had to make a new one of those as well. Start with some poplar for the sides, a quick layout of the dovetails. Saw, chisel and fit together.2023-08-04_06-33-57 by Kerry Grubb, on Flickr
2023-08-04_06-33-46 by Kerry Grubb, on Flickr2023-08-04_06-33-39 by Kerry Grubb, on Flickr2023-08-04_06-33-32 by Kerry Grubb, on Flickr2023-08-04_06-33-01 by Kerry Grubb, on Flickr2023-08-04_06-30-52 by Kerry Grubb, on Flickr2023-08-04_06-30-44 by Kerry Grubb, on Flickr
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #26 on: August 06, 2023, 08:55:33 AM »
Finished and ready to go back to the owner. It has only been sitting in my shop since 2021! No sense in rushing into things :shock:
2023-08-04_06-30-31 by Kerry
Grubb
, on Flickr
2023-08-04_06-30-14 by Kerry Grubb, on Flickr
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #27 on: August 06, 2023, 09:05:59 AM »
This is a LARGE cabinet we built for the church of which we did the red door installation. It was a bit of a challenge as its 10 feet long and the doors had to be a clear opening across the width to allow a metal hanging system to fold out. The racks are to hold linens for the alter, cabinet is cedar lined. Pics dont do it justice, its over 4 ft high and over 3 ft in depth. Had to build it as a knock down just so it would fit through the doorway.
2023-08-04_06-39-56 by Kerry Grubb, on Flickr
2023-08-04_06-38-57 by Kerry Grubb, on Flickr2023-08-04_06-40-07 by 2023-08-04_06-38-11 by Kerry Grubb, on FlickrKerry Grubb, on Flickr2023-08-04_06-39-26 by Kerry Grubb, on Flickr2023-08-06_09-48-12 by Kerry Grubb, on Flickr2023-08-06_09-48-21 by Kerry Grubb, on Flickr
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13358
  • located in western Ky
Re: Woodworking
« Reply #28 on: August 06, 2023, 09:48:52 AM »
I don't have the words to describe that much talent.  Simply amazing.
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

5th T/A

  • Oracle Forum Member
  • *
  • Posts: 1372
Re: Woodworking
« Reply #29 on: August 06, 2023, 12:07:26 PM »
Absolutely amazing skills and workmanship, you have a lot to be proud of!
1980 T/A with a Pontiac 461

Gone but not forgotten;
1973 T/A 455
1975 T/A 400
1978 T/A W72
1982 T/A cross fire injected

Two wheel toys;
2014 Harley Ultra Classic Limited
2013 Honda CB1100
2010 Yamaha Vmax
1982 Yamaha Seca 750

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #30 on: August 07, 2023, 06:30:59 AM »
Thanks guys. Just showing what keeps me busy in my spare time, LOL. Shop jobs are kinda hit and miss as most of the work we do is at peoples houses. They do come in on occasion and sometimes it seems like all at once. I would prefer doing custom millwork out of the shop full time but dont actively look for that kind of work. I have about 20 pair of shutters that need to be refurbished then all of my current shop load will be caught up. Can dedicate more time to getting the old bird out of there.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

FormTA

  • Oracle Forum Member
  • *
  • Posts: 5538
  • Life is short, have fun, Drive a T/A
Re: Woodworking
« Reply #31 on: August 07, 2023, 06:54:17 AM »
That is pretty awesome! Are the doors like bifold or something to clear the ranks? Really cool. Great work!
79 Trans am low buck LS swapped
79 Formula 301 (Work in progress)
67 RS Camaro (waiting it's turn)
69 Dodge charger on late model charger chassis
49 Ford F1 on a 2003 Chevy ZR2 Chassis (current project)
Names, Luke. If I hear anyone telling me they're my father....

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #32 on: August 08, 2023, 05:26:09 AM »
Yes, the bifold doors were the biggest challenge. The overall opening is almost 10' and unlike a bifold closet door where the top track just holds the top of the doors in place, in this case the top track had to be 'structural' for lack of a better word. The doors hang from the top track. Finding the right hardware was surprisingly difficult. When I bid the job I figured no big deal. But I chased that stupid stuff down for months before finding just the right thing. Trying to keep the top from bowing down with the weight in the middle was another challenge, I think (and hope) we got that one figured out as well, LOL.
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #33 on: March 28, 2024, 05:16:24 PM »
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #34 on: March 28, 2024, 05:18:28 PM »
Another crazy project. I have a very good customer that owns an 18th century house. We do their maintenance and upkeep. They had a couple of chairs that had broken legs. One on the back one on the front. They wanted them repaired for Easter dinner. They were actually a pretty easy fix, AND they were in my shop for less than a week! That is a new record. The last table I had to restore only took about 3 years :shock: :grin:
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

FormTA

  • Oracle Forum Member
  • *
  • Posts: 5538
  • Life is short, have fun, Drive a T/A
Re: Woodworking
« Reply #35 on: March 28, 2024, 05:57:04 PM »
Wow! Those came out great!
79 Trans am low buck LS swapped
79 Formula 301 (Work in progress)
67 RS Camaro (waiting it's turn)
69 Dodge charger on late model charger chassis
49 Ford F1 on a 2003 Chevy ZR2 Chassis (current project)
Names, Luke. If I hear anyone telling me they're my father....

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13358
  • located in western Ky
Re: Woodworking
« Reply #36 on: March 29, 2024, 05:55:09 AM »
I wish you'd move down this way, close to me.  I'd keep you busy with woodworking projects.  :-D
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

roadking77

  • Oracle Forum Member
  • *
  • Posts: 13210
Re: Woodworking
« Reply #37 on: March 29, 2024, 06:31:35 AM »
I have enough, LOL. I need time to work on my car :grin:
Finished!
77 T/A - I will Call this one DONE!
79 TATA 4sp-Next Project?
79 TATA - Lost to Fire!
86 Grand Prix - Sold
85 T/A - Sold
85 Fiero - Sold
82 Firebird - Sold
'38-CZ 250
'39-BSA Gold Star
'49-Triumph 350
'52-Ariel Red Hunter
'66-BSA Lightning
'01-HD RoadKing

Re: Woodworking
« Reply #37 on: March 29, 2024, 06:31:35 AM »
You can help support TAC!