Author Topic: Final days of Norwood production  (Read 3053 times)

Warren Seale

  • Active Forum Member
  • *
  • Posts: 970
Final days of Norwood production
« on: February 24, 2025, 10:39:07 AM »
I found this video showing the happenings at the Norwood factory the day before it closed down in August of 87.  It was recorded by one of the employees.  It's a very informal amateur recording that is not of the best quality.  But, if you can tolerate the crappy quality, it does show the human side of car production.  It focuses on the workers everday life at the factory. 

One highlight of the video is at the 46:00 time stamp.  It's one of those WTF moments on the line.

https://www.youtube.com/watch?v=tFYyPwYLkPY
79 T/A,WS6,403,A3
96 T/A,WS6(#1344),M6
72 442,W30,A3
96 Vette Grand Sport convertible (#713),F45,LT4,M6
13 427 Vette convertible (#1425),Z30/Z25,M6

kentucky yeti

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 13414
  • located in western Ky
Re: Final days of Norwood production
« Reply #1 on: February 24, 2025, 01:39:16 PM »
That was interesting to watch.  The end of an era, for sure.
Mike (aka Yeti)

1977 Y82 W72 Auto
2015 F-150 Lariat 4x4 (twin turbo)
2016 Explorer Limited
2012 Mustang

langss

  • Active Forum Member
  • *
  • Posts: 362
Re: Final days of Norwood production
« Reply #2 on: February 24, 2025, 11:13:59 PM »
Thanks for that. Interesting to say the least. I have a Relative that worked at Van Nuys. I don't know how GM took care of the workers at Norwood, but they must have learned the lessons because the guy was way to young to be retiring, and he got enough money to not have to go out and get another job.

N PRGRES

  • Oracle Forum Member
  • *
  • Posts: 1296
Re: Final days of Norwood production
« Reply #3 on: February 25, 2025, 06:27:20 AM »
Sadly they made their own demise.  My father worked at a GM plant and most the people were lazy and could care less about quality or following any rules.  Foremen used to actually condemn my father who is a worker.  GM at this time built garbage.  Keep in mind I am not praising GM for shipping the jobs overseas or other corporate BS by any means, but it's not like they produced a high quality product
Dave

81 Trans Am w/73 400.

Warren Seale

  • Active Forum Member
  • *
  • Posts: 970
Re: Final days of Norwood production
« Reply #4 on: February 25, 2025, 07:11:27 AM »
Thanks for that. Interesting to say the least. I have a Relative that worked at Van Nuys. I don't know how GM took care of the workers at Norwood, but they must have learned the lessons because the guy was way to young to be retiring, and he got enough money to not have to go out and get another job.

According to the news clip at the end of the video, the workers got 90% of their pay for 1 year after the closing.
79 T/A,WS6,403,A3
96 T/A,WS6(#1344),M6
72 442,W30,A3
96 Vette Grand Sport convertible (#713),F45,LT4,M6
13 427 Vette convertible (#1425),Z30/Z25,M6

Re: Final days of Norwood production
« Reply #4 on: February 25, 2025, 07:11:27 AM »

FormTA

  • Oracle Forum Member
  • *
  • Posts: 5736
  • Life is short, have fun, Drive a T/A
Re: Final days of Norwood production
« Reply #5 on: February 25, 2025, 07:35:42 AM »
A company I worked for for 25 years went out of business. It is very emotional in ways tough to convey to someone that hasn't happened to. I totally could feel some of their pain, anxiety and frustration through that video
79 Trans am low buck LS swapped
79 Formula 301 (Work in progress)
67 RS Camaro (waiting it's turn)
69 Dodge charger on late model charger chassis
49 Ford F1 on a 2003 Chevy ZR2 Chassis (current project)
Names, Luke. If I hear anyone telling me they're my father....

N PRGRES

  • Oracle Forum Member
  • *
  • Posts: 1296
Re: Final days of Norwood production
« Reply #6 on: February 25, 2025, 08:57:16 AM »
A company I worked for for 25 years went out of business. It is very emotional in ways tough to convey to someone that hasn't happened to. I totally could feel some of their pain, anxiety and frustration through that video
Sadly I have had to close 3 plants back in 2008-2010, its not easy.
Dave

81 Trans Am w/73 400.

langss

  • Active Forum Member
  • *
  • Posts: 362
Re: Final days of Norwood production
« Reply #7 on: February 25, 2025, 08:34:16 PM »
Sadly they made their own demise.  My father worked at a GM plant and most the people were lazy and could care less about quality or following any rules.  Foremen used to actually condemn my father who is a worker.  GM at this time built garbage.  Keep in mind I am not praising GM for shipping the jobs overseas or other corporate BS by any means, but it's not like they produced a high quality product
Its funny that you say that, because it is Oh So True. I have an 84 Z-28. I call it The Damage Magnet. It must have been a Monday or a Friday car because is a real piece of work If the Lemon Law had been a thing it would be gone. But I really like the car so its still with me. By contrast, in 91 I bought my wife a used 86 Trans Am. This car was definitely a Wednesday car. When it was crashed it had over 240,000 miles on it. It was my daily driver. The Transmission went 135,000 before it started to leak and other than Fuel Injectors and a Maf, it ran like a Swiss watch. The 92 Camaro I replaced it with is almost that good, but previous owners tampered with it a lot so the Jury Is Still Out on that. But overall the workmanship on all three is nothing to write home about, so I'm sure it is really true that it mattered a lot what day of the week the car was produced.   

5th T/A

  • Oracle Forum Member
  • *
  • Posts: 1555
Re: Final days of Norwood production
« Reply #8 on: February 25, 2025, 08:53:27 PM »
Enjoyable video, thanks for sharing this glimpse back into a different time. Yeah, build quality in the 70’s and 80’s was poor. Probably as much by design and cost constraints  as assembly line workers. In a way we can thank Toyota, Honda and Datsun for raising the bar.
1980 T/A with a Pontiac 461

Gone but not forgotten;
1973 T/A 455
1975 T/A 400
1978 T/A W72
1982 T/A cross fire injected

Two wheel toys;
2014 Harley Ultra Classic Limited
2013 Honda CB1100
2010 Yamaha Vmax
1982 Yamaha Seca 750

Warren Seale

  • Active Forum Member
  • *
  • Posts: 970
Re: Final days of Norwood production
« Reply #9 on: February 26, 2025, 08:13:59 AM »
Sadly they made their own demise.  My father worked at a GM plant and most the people were lazy and could care less about quality or following any rules.  Foremen used to actually condemn my father who is a worker.  GM at this time built garbage.  Keep in mind I am not praising GM for shipping the jobs overseas or other corporate BS by any means, but it's not like they produced a high quality product
Its funny that you say that, because it is Oh So True. I have an 84 Z-28. I call it The Damage Magnet. It must have been a Monday or a Friday car because is a real piece of work If the Lemon Law had been a thing it would be gone. But I really like the car so its still with me. By contrast, in 91 I bought my wife a used 86 Trans Am. This car was definitely a Wednesday car. When it was crashed it had over 240,000 miles on it. It was my daily driver. The Transmission went 135,000 before it started to leak and other than Fuel Injectors and a Maf, it ran like a Swiss watch. The 92 Camaro I replaced it with is almost that good, but previous owners tampered with it a lot so the Jury Is Still Out on that. But overall the workmanship on all three is nothing to write home about, so I'm sure it is really true that it mattered a lot what day of the week the car was produced.   

Maybe the day of the week had nothing to do with the quality.  Both the 91 and 92 were Canadian built ???!!!
79 T/A,WS6,403,A3
96 T/A,WS6(#1344),M6
72 442,W30,A3
96 Vette Grand Sport convertible (#713),F45,LT4,M6
13 427 Vette convertible (#1425),Z30/Z25,M6

N PRGRES

  • Oracle Forum Member
  • *
  • Posts: 1296
Re: Final days of Norwood production
« Reply #10 on: February 26, 2025, 01:22:07 PM »
Enjoyable video, thanks for sharing this glimpse back into a different time. Yeah, build quality in the 70’s and 80’s was poor. Probably as much by design and cost constraints  as assembly line workers. In a way we can thank Toyota, Honda and Datsun for raising the bar.
Ironically the cars were generally reliable, even the POS 1980 chevette we had never broke.  The finish was horrible and after 8 years the seat rusted through the floor. :shock: :shock:
Dave

81 Trans Am w/73 400.

Re: Final days of Norwood production
« Reply #10 on: February 26, 2025, 01:22:07 PM »
You can help support TAC!