Author Topic: TAC Decals (Read 1649 times)

Raven · « **on:** January 10, 2023, 12:04:01 PM »

Howdy gang!
Does anyone remember the TAC club decals we used to have? I put my black/gold one on my toolbox and I have one more red/black one left but it's from ages ago and I don't know if it's still good so I was wondering about getting some new ones.

roadking77 · « **Reply #1 on:** January 10, 2023, 03:19:11 PM »

I have that same red one on the back window of my old truck. I have a gold one like yours still unused. I think I posted on here awhile back if anyone here printed them. I am pretty sure I got no response. I was willing to try and get some reproduced but did not want to infringe on anything. Def. not trying to make any money but I would still be interested in having some reproduced.

kentucky yeti · « **Reply #2 on:** January 10, 2023, 05:41:56 PM »

I still have a couple of unused ones. I assume mrbandit probably had them made, but it's been a few years and I've slept since then, so I'm not sure about that.

Jack · « **Reply #3 on:** January 10, 2023, 07:37:32 PM »

I forgot who made them back few years ago but it would be nice if we get more.

roadking77 · « **Reply #4 on:** January 11, 2023, 06:34:29 AM »

I do not think it was Mr. Bandit. But if it was I am sure he will set me straight

« **Reply #4 on:** January 11, 2023, 06:34:29 AM »

ryeguy2006a · « **Reply #5 on:** January 11, 2023, 07:17:06 AM »

I still have mine on my garage refrigerator.

Mac · « **Reply #6 on:** January 11, 2023, 10:38:07 AM »

I still have mine. I would order a few more if we can figure out who made them. I'll have to do some research, I'll look in my archived emails, I save all my emails of stuff I buy.

Raven · « **Reply #7 on:** January 11, 2023, 07:30:36 PM »

Thanks for the replies everyone, if someone does dig up additional info, please let me know. Otherwise maybe one of us can get the OK from MrBandit to get a new batch made.

Mac · « **Reply #8 on:** January 14, 2023, 07:00:38 PM »

Checked all my archived emails and invoices, nothing. Have no idea who made them.

roadking77 · « **Reply #9 on:** January 16, 2023, 08:03:46 AM »

I will throw this out there. I will check out a local sign guy and see if he can make copies. There is no trademark, etc. on the original so I dont think it will be illegal. I am not trying to be immoral and IF I can get this done I will charge cost only, so not trying to make money. I will say this like being at a wedding. IF there is anyone that thinks I should NOT do so, please say so now, and I wont.

Jack · « **Reply #10 on:** January 16, 2023, 06:44:56 PM »

Quote from: roadking77 on January 16, 2023, 08:03:46 AM

I will throw this out there. I will check out a local sign guy and see if he can make copies. There is no trademark, etc. on the original so I dont think it will be illegal. I am not trying to be immoral and IF I can get this done I will charge cost only, so not trying to make money. I will say this like being at a wedding. IF there is anyone that thinks I should NOT do so, please say so now, and I wont.

Assuming Mr. Bandit approves.

Wallington · « **Reply #11 on:** January 16, 2023, 06:53:09 PM »

Yep, he may be against contributing members having pride in the place. That's doesn't include those who only post in the Lobby.

Raven · « **Reply #12 on:** January 16, 2023, 08:01:45 PM »

We need to be respectful to Mr Bandit and the original creator. I don't believe it will be an issue, however it is not my site, name, domain, etc. It doesn't matter whether the intention is to monetize it or not. I too would be willing to make up a batch but I'd rather have Mr Bandit's (or the creator's) approval before doing anything along those lines. I'm in no rush, I should probably just send him a DM and see what he says.

ryeguy2006a · « **Reply #13 on:** January 17, 2023, 08:03:55 AM »

Has anyone sent him a private message about this? I'm sure he'd be for it.

Raven · « **Reply #14 on:** January 17, 2023, 12:36:30 PM »

I asked Yeti to reach out to him last night.

« **Reply #14 on:** January 17, 2023, 12:36:30 PM »

mrbandit · « **Reply #15 on:** January 17, 2023, 01:29:14 PM »

Back before he became famous with the 5th gen TA concept Kevin Morgan made all of them. I don't remember if he made them himself or outsourced them. I don't really have the complete source image to make them, but I do have the round bird artwork. I can see if I can do something on the printing sites that are available now.

Raven · « **Reply #16 on:** January 17, 2023, 08:40:54 PM »

Ah yes, that sounds familiar now that you mention it! Let me know if there is anything I can do to assist. Thanks!

72projectbird · « **Reply #17 on:** January 17, 2023, 08:57:18 PM »

I'd take a few if any more get made.

scarebird · « **Reply #18 on:** January 18, 2023, 10:39:01 AM »

There is a print shop down the street from me; they did 2 batchs of our "Scarebird" decals - excellent quality. But the last order they goofed and left the receipt for the company that actually printed them

:

Discount Labels
PO Box 709
4115 Profit Court
New Albany, IN 47150-0709

www.discountlabels.com

mrbandit · « **Reply #19 on:** January 18, 2023, 01:27:18 PM »

Thank you for that resource.

kentucky yeti · « **Reply #20 on:** January 31, 2023, 02:31:17 PM »

I just ran across this one while packing and cleaning out my "office."

aussieta · « **Reply #21 on:** January 31, 2023, 04:30:45 PM »

ooooh i like that one

Raven · « **Reply #22 on:** January 31, 2023, 08:05:25 PM »

That is a nice one too!

roadking77 · « **Reply #23 on:** February 01, 2023, 06:09:13 AM »

That is nice!

« **Reply #23 on:** February 01, 2023, 06:09:13 AM »

News:

Author Topic: TAC Decals (Read 1649 times)