Speedhut

[N PRGRES]

Has anyone used Speedhut gauges on thier TA?

[scarebird]

Yes, worked very well.  Used their CANBUS series.  Was able to design my own background.

[N PRGRES]

Yes, worked very well.  Used their CANBUS series.  Was able to design my own background.

I like the gauges but how different is it with them being so much closer as opposed to being recessed a bit further back?  Also, what sizes are they?

[scarebird]

No difference really.

I do not have that record- you can measure the holes in the dash for best fit.

[stros]

Yes they’re great - mine have been working well for 5 plus years now.  Lots of customization options too. Used them for my console gauges.

[JJ 109]

Absolutely. They are great, and let you design your own if you prefer

https://photos.app.goo.gl/GQWZ8Jsi9NexRKUp9

[scarebird]

dammit stros, now I am jealous!

 I made mine simple to read quickly but yours look really nice!

[Jack]

Those are very nice, I also like the steering wheel.

[JJ 109]

Thank you

[stros]

dammit stros, now I am jealous!

 I made mine simple to read quickly but yours look really nice!

Thanks!  Your gauges look great too!

[nUcLeArEnVoY]

Dakota Digital came out with their new RTX line for the 2nd-gens if you want digital quality and responsiveness with a more stock/vintage look:

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1280/mode=prod/prd1280.htm

[Updated71]

Dakota Digital came out with their new RTX line for the 2nd-gens if you want digital quality and responsiveness with a more stock/vintage look:

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1280/mode=prod/prd1280.htm

Very cool!  Happy to see they are supporting 2nd gens.

Here are my Speedhuts:

[N PRGRES]

Dakota Digital came out with their new RTX line for the 2nd-gens if you want digital quality and responsiveness with a more stock/vintage look:

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1280/mode=prod/prd1280.htm

I don't like the font on those gauges

[N PRGRES]

Dakota Digital came out with their new RTX line for the 2nd-gens if you want digital quality and responsiveness with a more stock/vintage look:

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1280/mode=prod/prd1280.htm

Very cool!  Happy to see they are supporting 2nd gens.

Here are my Speedhuts:

Nice!  Did you go with the GPS Speedo?

[Updated71]

Dakota Digital came out with their new RTX line for the 2nd-gens if you want digital quality and responsiveness with a more stock/vintage look:

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1280/mode=prod/prd1280.htm

Very cool!  Happy to see they are supporting 2nd gens.

Here are my Speedhuts:

Nice!  Did you go with the GPS Speedo?

Thank you.

I did. One thing I wish I would've done is pull the gauge markings and font in just slightly instead of the way it is toward the edge. From certain angles and because the gauges have the rings, it can be partially obscured.

[djustice]

I am working on my setup, partial speedhut for  now, Speedo will be next but i am testing out a layout (in poor MS paintskill, lol)for Brake warning ligths integrated within the speedhut speedometer gauge (turning the integrated blinker indicators into, brake warning ligth and Alternator warning ligth)
Speedhut said they can alter the input after what i needed, grund triggerd og +12V triggerd)

[N PRGRES]

I am working on my setup, partial speedhut for  now, Speedo will be next but i am testing out a layout (in poor MS paintskill, lol)for Brake warning ligths integrated within the speedhut speedometer gauge (turning the integrated blinker indicators into, brake warning ligth and Alternator warning ligth)
Speedhut said they can alter the input after what i needed, grund triggerd og +12V triggerd)

Nice!  Also how do you like the sniper system?

[djustice]

I had a long thread on here with pictures and key install pointers on the way i did my Sniper install, but in short. I am happy with the system.
Lets just say if you have any eletrical problems, be it poor ground, or poorly insulated cables you will find out when you install the complet sniper system (TBI, coil, CD-box and halleffect distributor) they wil manifest them selvs and you have to deal with it   
But once taken care of the system is awsome.

[Jeremy]

I've had Speedhut installed for 10 plus years now.  I think I screwed up the fuel gauge and called Speedhut.  Customer service went through some trouble shooting with me and agreed it sounds like there is a problem with the gauge.  They found my order from way back and told me to send it in.  It is boxed and ready to go out tomorrow.

I mounted my gauges in the aluminum bezel and love the way they look.  My son liked it so much we mounted the NVU gauges in his 79 Camaro in the factory bezel in lieu of behind like the originals.  Look factory ish but such a cleaner view of the gauges.  I'll try to get some pics tomorrow.

[RamblerRacer]

I can definitely recommend Speedhut.
I have some pics but Imgur is giving me problems finding them using my IPad   I’ll post some up when I can