2020-B1-9

Author Topic: budget friendly 18" wheels  (Read 1083 times)

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
budget friendly 18" wheels
« on: September 11, 2019, 08:44:38 AM »
I've mentioned these wheels in the past and have 2 set myself, as a Pro-touring/ autoX enthusiast this size wheel is a must, I get many customers ask about wheels, many times the cost is way up and some ca't afford $4000 in wheels.

I have found these Vision 143 wheels to be about the best deal available anywhere, they are available in 18X9.5 with zero offset, 6mm and 12mm AND they have the correct 5x4.75 bolt pattern not a slightly off metric pattern.
The other thing I like about them is that they have a 2100 lbs load ratting vs most others are in the 1900 lbs further more I have sent some of these wheels out to have widened and they spin the wheel first to make sure it is good and can be modified (many inexpensive wheels will not past the test) I just talked to the shop yesterday on a set of wheels they have for me and they said the wheels past the test with flying colors.

so the better news is the price, they are available through a few places, this last time I got them of Amazon $127 each!! so that is $504 for 4 wheels !!! I sent 2 of them to Weldcraft wheels in MI the widening is $225 per wheel, widening the rear wheels 3" to 18X 12.5 for a 335 tire and widening the front wheels 1" to 18X10.5 for a 315 tire
so for $1404 I will have a set of wheels to fit the biggest tires possible, now the front wheels don't need to be done if you will run a more sensible size like a 275 up front so that's only $954 .
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

Jack

  • Oracle Forum Member
  • *
  • Posts: 10717
  • 1971 Esprit TA Clone W72 1972 Formula 68 350 HO
Re: budget friendly 18" wheels
« Reply #1 on: September 11, 2019, 09:06:54 AM »
Thanks for the great info.




Regards, Jack

jonathonar89

  • Oracle Forum Member
  • *
  • Posts: 2038
Re: budget friendly 18" wheels
« Reply #2 on: September 11, 2019, 10:18:44 AM »
Very true Dave.

Vision 143 is the best priced wheel out right now.  18x9.5 with 275/35-18 is the minimum for where most of us want to be.  Different car but I have that size on my ‘98 and it kicks ass.

Ryoko

  • Active Forum Member
  • *
  • Posts: 591
Re: budget friendly 18" wheels
« Reply #3 on: September 11, 2019, 10:25:20 AM »
I measured the rear tubs on my 79, and it looks like 255 is as wide as you can get without rubbing problems. 275's would look good, but how do you make them fit without tubs?

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #4 on: September 11, 2019, 10:47:25 AM »
I measured the rear tubs on my 79, and it looks like 255 is as wide as you can get without rubbing problems. 275's would look good, but how do you make them fit without tubs?

there is plenty of room for 275's, with the right suspension 285/295s we even have a few customers with 315's in the rear roll the lip and massage the seat belt hump.

look in the sticky about stance and wheels.
The car in this picture has 17x9 with 275/40-17 tires all around using PTFB GT suspension kit, it was driven from NJ to Chicago then to Dayton at the T/A national where this picture was taken, then driven back to NJ, this was just a couple weeks ago.

« Last Edit: September 11, 2019, 10:53:16 AM by 79T/Aman »
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #5 on: September 11, 2019, 10:55:13 AM »
here is another street driven car, stock frame NO tubs, leaf springs.
This car has 18X10 and 18X10.5 with 315's all around.

www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

Ryoko

  • Active Forum Member
  • *
  • Posts: 591
Re: budget friendly 18" wheels
« Reply #6 on: September 11, 2019, 12:01:11 PM »
What diameter tires? The 275/35R18 is a full 1-1/4" smaller in diameter compared to the stock 27" tire. Is that why they clear?

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #7 on: September 11, 2019, 01:49:40 PM »
What diameter tires? The 275/35R18 is a full 1-1/4" smaller in diameter compared to the stock 27" tire. Is that why they clear?

Yes the diameter makes a big difference in fitment.
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #8 on: October 02, 2019, 08:44:13 AM »
just got my wheels back from Weldcraft 18 X 12.5 now  :cool:
I started with a 18X9.5 zero offset (5.25 back space) now they are 12.5 wide with 8.25 back space to fit a 335 tire.
The rear end is going to be 2.5" wider per side to accommodate the deeper back space.
VSE fender flares are being installed on the car as well so no mini tubs.

« Last Edit: October 02, 2019, 08:45:51 AM by 79T/Aman »
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

FormTA

  • Oracle Forum Member
  • *
  • Posts: 3778
Re: budget friendly 18" wheels
« Reply #9 on: October 02, 2019, 09:57:11 AM »
Sweet!!
79 Trans am 301 (work in progress) LS swap n progress
79 Formula 301 (Work in progress)
67 RS Camaro (Work in progress)
See the recurring theme???

Names, Luke. If I hear anyone telling me they're my father....

JJ 109

  • Active Forum Member
  • *
  • Posts: 182
Re: budget friendly 18" wheels
« Reply #10 on: October 07, 2019, 08:29:47 AM »
WOW!!  8.5 back space?  No leafsprings?
JJ
76 pro tour project
Twin Turbo LS1
Detroit

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #11 on: October 07, 2019, 11:45:09 AM »
WOW!!  8.5 back space?  No leafsprings?

of course it has leaf springs, I did mention the rear end is 2.5" wider on each side.
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

JJ 109

  • Active Forum Member
  • *
  • Posts: 182
Re: budget friendly 18" wheels
« Reply #12 on: October 08, 2019, 10:10:52 AM »
ahhh, you did and I read it wrong.  I got you pushed them out 2.5 but not by the rear end.

Makes sense now.  Very cool.
JJ
76 pro tour project
Twin Turbo LS1
Detroit

Ford5of5

  • Oracle Forum Member
  • *
  • Posts: 1155
  • I reject your reality and substitute my own
Re: budget friendly 18" wheels
« Reply #13 on: October 08, 2019, 12:13:38 PM »
Looks like you turned your TA into a dually, love it! :lol:

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #14 on: October 09, 2019, 07:23:41 AM »
ahhh, you did and I read it wrong.  I got you pushed them out 2.5 but not by the rear end.

Makes sense now.  Very cool.

yes I did push them out by the rear end, we added 2.5" to each side of the rear end thus pushing the wheels out 2.5" giving me enough room inboard to use 8.25" back space.
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

Re: budget friendly 18" wheels
« Reply #14 on: October 09, 2019, 07:23:41 AM »


2020-B1-8


73ta

  • Active Forum Member
  • *
  • Posts: 192
Re: budget friendly 18" wheels
« Reply #15 on: October 11, 2019, 11:04:55 AM »
I've mentioned these wheels in the past and have 2 set myself, as a Pro-touring/ autoX enthusiast this size wheel is a must, I get many customers ask about wheels, many times the cost is way up and some ca't afford $4000 in wheels.

I have found these Vision 143 wheels to be about the best deal available anywhere, they are available in 18X9.5 with zero offset, 6mm and 12mm AND they have the correct 5x4.75 bolt pattern not a slightly off metric pattern.
The other thing I like about them is that they have a 2100 lbs load ratting vs most others are in the 1900 lbs further more I have sent some of these wheels out to have widened and they spin the wheel first to make sure it is good and can be modified (many inexpensive wheels will not past the test) I just talked to the shop yesterday on a set of wheels they have for me and they said the wheels past the test with flying colors.

so the better news is the price, they are available through a few places, this last time I got them of Amazon $127 each!! so that is $504 for 4 wheels !!! I sent 2 of them to Weldcraft wheels in MI the widening is $225 per wheel, widening the rear wheels 3" to 18X 12.5 for a 335 tire and widening the front wheels 1" to 18X10.5 for a 315 tire
so for $1404 I will have a set of wheels to fit the biggest tires possible, now the front wheels don't need to be done if you will run a more sensible size like a 275 up front so that's only $954 .

Which offset would be the one for my 73 TA with your comp suspension? none, 6 or 12 mm?

73ta

  • Active Forum Member
  • *
  • Posts: 192
Re: budget friendly 18" wheels
« Reply #16 on: October 11, 2019, 11:06:41 AM »
I've mentioned these wheels in the past and have 2 set myself, as a Pro-touring/ autoX enthusiast this size wheel is a must, I get many customers ask about wheels, many times the cost is way up and some ca't afford $4000 in wheels.

I have found these Vision 143 wheels to be about the best deal available anywhere, they are available in 18X9.5 with zero offset, 6mm and 12mm AND they have the correct 5x4.75 bolt pattern not a slightly off metric pattern.
The other thing I like about them is that they have a 2100 lbs load ratting vs most others are in the 1900 lbs further more I have sent some of these wheels out to have widened and they spin the wheel first to make sure it is good and can be modified (many inexpensive wheels will not past the test) I just talked to the shop yesterday on a set of wheels they have for me and they said the wheels past the test with flying colors.

so the better news is the price, they are available through a few places, this last time I got them of Amazon $127 each!! so that is $504 for 4 wheels !!! I sent 2 of them to Weldcraft wheels in MI the widening is $225 per wheel, widening the rear wheels 3" to 18X 12.5 for a 335 tire and widening the front wheels 1" to 18X10.5 for a 315 tire
so for $1404 I will have a set of wheels to fit the biggest tires possible, now the front wheels don't need to be done if you will run a more sensible size like a 275 up front so that's only $954 .

Which offset would be the one for my 73 TA with your comp suspension? none, 6 or 12 mm, 18 X 9.5"


79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #17 on: October 11, 2019, 01:28:20 PM »
I've mentioned these wheels in the past and have 2 set myself, as a Pro-touring/ autoX enthusiast this size wheel is a must, I get many customers ask about wheels, many times the cost is way up and some ca't afford $4000 in wheels.

I have found these Vision 143 wheels to be about the best deal available anywhere, they are available in 18X9.5 with zero offset, 6mm and 12mm AND they have the correct 5x4.75 bolt pattern not a slightly off metric pattern.
The other thing I like about them is that they have a 2100 lbs load ratting vs most others are in the 1900 lbs further more I have sent some of these wheels out to have widened and they spin the wheel first to make sure it is good and can be modified (many inexpensive wheels will not past the test) I just talked to the shop yesterday on a set of wheels they have for me and they said the wheels past the test with flying colors.

so the better news is the price, they are available through a few places, this last time I got them of Amazon $127 each!! so that is $504 for 4 wheels !!! I sent 2 of them to Weldcraft wheels in MI the widening is $225 per wheel, widening the rear wheels 3" to 18X 12.5 for a 335 tire and widening the front wheels 1" to 18X10.5 for a 315 tire
so for $1404 I will have a set of wheels to fit the biggest tires possible, now the front wheels don't need to be done if you will run a more sensible size like a 275 up front so that's only $954 .

Which offset would be the one for my 73 TA with your comp suspension? none, 6 or 12 mm?

Zero offset
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

Roofman

  • Forum Member
  • *
  • Posts: 2
Re: budget friendly 18" wheels
« Reply #18 on: January 06, 2020, 09:05:08 AM »
here is another street driven car, stock frame NO tubs, leaf springs.
This car has 18X10 and 18X10.5 with 315's all around.


     
                   What is your back space front and rear for those wheels? I really like look of 315's. I currently have 18x10 with 5.7 bs and 285/40. Front requires 1/4" spacer to not rub sway bar or rub upper A arm. Rears have about 1/2" clearance. Seat belt hump flattened. I like idea of same backspace so I can rotate tire.   

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #19 on: January 06, 2020, 10:12:20 AM »
We run 18X10 or 10.5 in the front and 18X10.5 or 11 in the rear with 6.250 back space on the 11" wide wheels and 6" back space on the front wheels, this car is also very low and the front fenders have the lip rolled and custom made fiberglass inner fenders ( I have the molds for those inner fenders ;-)
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

JJ 109

  • Active Forum Member
  • *
  • Posts: 182
Re: budget friendly 18" wheels
« Reply #20 on: January 09, 2020, 11:31:33 AM »
Can you share the details on those inner fenders?

Do you need those to get the 18x10's in front?
JJ
76 pro tour project
Twin Turbo LS1
Detroit

79T/Aman

  • Oracle Forum Member
  • *
  • Posts: 2856
      • http://www.pro-touringf-body.com
Re: budget friendly 18" wheels
« Reply #21 on: January 10, 2020, 12:09:38 PM »
Can you share the details on those inner fenders?

Do you need those to get the 18x10's in front?
You do not need to use those inner fender wells to use 315s up front but depending on how low the car is they allow the car to be run lower than without them or you have to run no inner fenders
www.pro-touringf-body.com  your source for making your Trans am do what it does best!......SHOW OFF!

Re: budget friendly 18" wheels
« Reply #21 on: January 10, 2020, 12:09:38 PM »
You can help support TAC!

 



2020-B1-3