TAC Tech => Tires, Brakes & Suspension => Topic started by: jcarr on December 23, 2018, 11:12:48 PM

Title: VSE/ Fiream Suspension Parts Installation
Post by: jcarr on December 23, 2018, 11:12:48 PM
I recently purchased the following VSE parts from National Parts Depot.
Front and Rear sway bars
Rear sway bar HD drop links
Leaf spring front eye relocation brackets

I am planning to install over the winter but wanted to see if anyone has upgraded their suspension with these part already that can provide any tips or shortcuts before I get started. NPD did not include any direction or torque specs with any of the products.

Thanks
Justin
Title: Re: VSE/ Fiream Suspension Parts Installation
Post by: Dreamn2 on December 24, 2018, 12:24:14 PM
If you are on FB, you may want to join our Fire Am Owner's Group. Someone on there may have the information. I have the original parts on my car but don't have any of the specs.
Title: Re: VSE/ Fiream Suspension Parts Installation
Post by: jcarr on December 25, 2018, 09:41:10 AM
Thanks for the invite. Just joined the FB group.
Justin
Title: Re: VSE/ Fiream Suspension Parts Installation
Post by: 79T/Aman on December 25, 2018, 11:02:41 AM
they replace the stock parts so nothing complicated and you use the stock torque specs, if you don't know or find the stock torque specs use a bolt torque spec chart, just know what grade bolt and size you are using.